Wide track front wishbone kit 3rd generation.
Lighter widetrack kit, using new style light weight ball joints, a development filter down from the Sport Turbo ST3 Westfield.
The full set of wishbones is 1 kg lighter than the standard Westfield widetrack
2 top and 2 bottom powder coated +50mm wide track wishbones 3rd generation
2 camber adjusters for top wishbones
4 top hat bushes for aluminium uprights to fit new style ball joints 2 upper 2 lower
2 top ball joints and nuts 3rd generation
2 lower ball joints and retaining clips 3rd generation
All nuts bolts and washers to fit the kit to your car.
You will also require
8 suspension bushes (4313001)
2 longer brake hoses. (sei rear brake hoses required 2311007)
2 Wide track front springs (3702093)
This kit is only suitable for cars with Westfield aluminium front uprights, to enable the ball joint sleeves to be replaced with the new version supplied in the kit. (This operation will require the use of a hydraulic press) this process can be can be carried out by Westfield if required for a small fee.
*Using this new widetrack kit, you will require 2 rear dampers to use on the front of the car, as shock extensions cannot be used on this widetrack kit*
**If you have existing standard track anti roll bar - This will not fit this application, replacement widetrack anti roll bar 3713148**